Trần Văn Ý | Mr. |
I Sales Engineer I
========================
I cellphone I +84 989 199 111
+84 916 152 811
I email I vany@pitesco.com
vany.pitesco@gmail.com
I Sales Engineer I
========================
I cellphone I +84 989 199 111
+84 916 152 811
I email I vany@pitesco.com
vany.pitesco@gmail.com
I Skype I
ytranht
EE33 is optimised for reliable humidity and temperature measurement in applications with temporary condensation, permanent high humidity or chemical exposure. Condensation on the monolithic humidity sensor and the filter cap is prevented by controlled heating of the sensor.
The measuring principle of EE33 type J with separate humidity and temperature probes and dual heating enables precise continuous measurement even at permanent high humidity.
The remote probe can be employed up to 180°C (356°F) and the pressure tight version up to 100bar. The three-part design of rugged enclosure in polycarbonate or aluminium allows easy mounting and replacement. The measurands are available on two analogue outputs and a serial interface.
An optional relay output can be used for alarms and process control. The proprietary coating protects the sensors and their leads against corrosive and electrically conductive pollution.
Key features
- Highest measurement accuracy with monolithic humidity sensor
- Heating modes for temporary condensation, permanent high humidity or chemical exposure
- Optional module for external triggering of heating mode
- Short response time and fast recovery after condensing conditions
- Precise measurement at permanent high humidity
- Outstanding temperature compensation
- Sensor protection against pollution and corrosion
- Rugged aluminium enclosure
- Pressure tight probe up to 100 bar
- Process temperature up to 180°C
- Analogue current and voltage outputs
- Optional RS-485 and standard RS-232 interface
- Optional alarm outputs
- Optional LCD Display
- Additional physical quantitites calculated
- Easy field adjustment
- Outputs freely configurable by user
- Dew point only type available
Typical applications
- pharmaceutical and food industry
- driers for ceramics, wood, concrete, polyester etc.
- greenhouses, mushroom farms
- high-humidity storage rooms
- climate, test and curing chambers
- meteorology
Technical data
- 0...100% RHMEASURING RANGE
-40...180°C (-40...356 °F) - ±1.3% RHACCURACY
±0.2 °C (0.36 °F) - < 15sRESPONSE TIME
- RS232C + optional RS485SERIAL INTERFACE
- 0-1/5/10 V or 0/4-20 mAOUTPUTS
- 24V AC/DCSUPPLY
Product inquiry
Send us your e-mail, we will do our best to help you!
Downloads
DATASHEET | |
---|---|
EE33 Datasheet(1331.43 kb) | |
Scaling of the outputs(252.78 kb) | |
EE-PCA Product Configuration Adapter(795.83 kb) | |
Accessories(2457.9 kb) | |
Humidity Calibration-Kit Datasheet(428.89 kb) |
MANUAL | |
---|---|
EE33 Manual(5853.48 kb) | |
Calibration Kit - User Guide(1042.14 kb) | |
Cleaning Instructions(1054.21 kb) | |
Relabeling in case of product configuration change(1339.66 kb) |
SOFTWARE | |
---|---|
EE-PCS Product Configuration Software(22768.41 kb) |
SUPPORT LITERATURE | |
---|---|
Information about the monolithic humidity sensor HMC01(77.14 kb) | |
Communication protocol for industrial transmitter(140.99 kb) |
Reports
- DOWNLOAD
Humidity measurement in meteorology
Air humidity and temperature play an important role in meteorology. Highly accurate measurements of these climate parameters form the basis of accurate forecasts and meaningful records. - DOWNLOAD
Drying of technical ceramics
Monitored and controlled drying is a very important stage in the production process for technical ceramics. To achieve optimum product quality, both the temperature and the humidity are controlled in the drying process. High levels of chemical contamination of the humidity / temperature transmitter complicate the measurement - DOWNLOAD
Ice detection for wind turbines
Monitoring of the external temperature and relative humidity is essential for the smooth running of wind energy systems. In order to ensure the safe and efficient operation of wind turbines, the weather conditions must be continuously monitored - DOWNLOAD
Humidity measurement in fuel cells
In fuel cells, hydrogen and oxygen react in a controlled manner to effi ciently produce electricity and heat. The voltage which is achieved depends on the fuel, the quality of the cell, the temperature and the relative humidity of the gases used - DOWNLOAD
Climate control for fruit storage
It's well known that you can't compare apples with oranges. This also applies to the storage of various kinds of fruit. Very stringent requirements are placed on storage in order to ensure that fresh fruit is available throughout the year
Accessoires
HA010105
PTFE Filter
HA010114
PTFE stainless steel filter
HA010603
RS232 to RS485 Converter
HA010301
RS232 Interface Cable for Screw Terminals
HA010304
RS232 Interface Cable with Pin Connector
HA010311
RS232 Interface Cable with External Plug
Không có nhận xét nào:
Đăng nhận xét