0

StackGuard | Sigrist Vietnam

Sigrist Vietnam

Trần Văn Ý | Mr. |
I Sales Engineer I
========================
I cellphone I          +84 989 199 111
                                +84 916 152 811
I email I                  vany@pitesco.com
                                vany.pitesco@gmail.com

StackGuard

Dust Concentration Monitor for Hot Gasses
StackGuard
  • Monitoring of hot gases in individual setup for facilities not under directives 2000/76/EC and 2001/80/EC
  • Continuous measurement of particulate matter concentration via scattered light principle
  • Automatic zero and span drift check and adjustment
  • Easy adjustment with checking rods
  • Highest sensitivity in range µm/Nm³
  • Low contamination of the flow cell
Inquiry
The StackGuard continuously monitors the scatted light intensity of an extracted, withdrawn sample of gas. The laser light source minimized stray light and improves sensitivity to the µg/m³ level, the filtered purge air prevents from window soiling. A calibration check is performed by means of a checking rod.

StackGuard

Dust Concentration Monitor for Hot Gasses
StackGuard
Nominal range
0 .. 100 PLA (Polystyrol-Latex-Aerosols)
Scale ranges
max. 8 ranges between 0..0.05 PLA and 0..100 PLA
Resolution
0.0002 PLA
Protection
IP65
Sample flow rate
25..50 l/min
Power input
25 W (basic version)
Weight
ca. 8.4 kg (basic verson)
Sample temperature
max. +170°C
Sample pressure
max. ±3'000 Pa (±30 mbar)
Interfaces
Profibus DP (optional)
Connections
2 x 0/4 .. 20 mA, max. 600 ohms
2 x relais contacts max. 250 VAC, max. 4 A
digital in-/outputs max. 5 V
Ambient environment
-20 .. +50° C
0 .. 99% rel. humidity, not condensing
Maximum service altitude
3,000 m above sea level
Power supply
85..264 V / 47..63 Hz
or 24 VDC

Unknown

Phasellus facilisis convallis metus, ut imperdiet augue auctor nec. Duis at velit id augue lobortis porta. Sed varius, enim accumsan aliquam tincidunt, tortor urna vulputate quam, eget finibus urna est in augue.

Không có nhận xét nào:

Đăng nhận xét